Deepen Bolts Pull Test lab Mechanics of Materials Science For Civil Engineering ~ Free Download Internet Tools

Wednesday 24 April 2013

Deepen Bolts Pull Test lab Mechanics of Materials Science For Civil Engineering

12:05 Muhammad Hamzah Fansuri No comments

All solid material will deform when under load. Changes depending on the shape of the load, the chemical element and load conditions, the specimen shape, temperature, speed of loading, and so on. At the time of practicum also produced a stress and strain. Voltage intensity is itself a force in the element structure in response to the deformation caused by the operation of external loads. In general, the intensity of this style trending oblique to the field pieces. Deformation is a structural element that can change shape geometrically, this phenomenon was caused by the placement of external loads and temperature changes. Deformation occurs on the load receiving element rod outside depending on the initial size of the cross section so that more appropriate when expressed in the form of strain that is comparative value per unit of measure dimensional changes to the first dimension, the strain can also be defined as a non-dimensional expression of the deformation. A curve that connects between the load and the specimen deformation (deformation) is the main part of the study of the mechanical properties of the specimen material. However, the testing is usually somewhat different when different geometric shapes, although the same material. Therefore the form of a standardized test specimens were made such that the voltage-voltage curves obtained also the standardization anyway.